• 大家都在搜: 不锈钢酒店装饰玻璃空透隔断 不锈钢金属工程玄关走道屏风 不锈钢酒店装饰中式屏风 不锈钢金属工程不锈钢橱柜 不锈钢花纹屏风镀钛
  • 18763996167


  • 全国咨询热线
四川福彩网
服务热线
18763996167
座机:0531-88275278 
邮箱: 279546205@qq.com
地址:山东省济南市天桥区大桥街道办事处倪家村136号
当前位置:四川福彩网-新闻资讯>行业新闻>你知道不锈钢仿古是怎么做旧的吗?

你知道不锈钢仿古是怎么做旧的吗?

来源:http://www.719gcxzh.cn 日期:2020-06-18 发布人:shenghu
  不锈钢仿古做旧已经有些年头了,随着生活水平提高,人们越来越注重家居生活,以至于装饰行业很火。然而,现目前不锈钢仿古做旧装饰在装饰行业市场盛行,大多用户表示都很青睐这一饰物带来的美感。那不锈钢仿古做旧是怎么做的?又有哪些方法?以下由小编揭秘,供大家参考。
  Stainless steel antique has been used for some years, with the improvement of living standards, people pay more and more attention to home life, so that the decoration industry is very hot. However, at present, the stainless steel antique decoration is popular in the decoration industry market, and most users say they are very fond of the beauty brought by this decoration. How is stainless steel antique made? What are the methods? The following is disclosed by the editor for your reference.
  不锈钢仿古做旧流程简介(药水氧化仿古)
  Brief introduction of stainless steel antique making process
  1、不锈钢外貌打磨(百洁布,中岳钛金,砂纸)或盐酸活化;
  1. Stainless steel surface grinding (baguibu, Zhongyue titanium, sandpaper) or hydrochloric acid activation;
  2、用稀释后的不锈钢专用发黑药水(稀释比例:药剂:水=1:3)浸泡可能刷涂(在药水中);
  2. It is possible to brush (in the solution) with the diluted stainless steel special blackening solution (dilution ratio: Agent: water = 1:3);
  3、发黑后取出迅速放入清水中拉丝,拉丝进程中按照本身所需要的深浅颜色而节制拉丝手法的力度;
  3. After blackening, take it out and quickly put it into water for drawing. In the process of drawing, control the strength of drawing technique according to the required dark and light color;
  4、然后再次用活动的清洁自来水冲洗,晾干可能抹干;
  4. Then wash it with clean tap water again, dry it in the air and wipe it dry;
  5、待晾干后罩一层氟碳仿古着色剂(仿古铜着色剂是由氟碳清漆差异颜色的油性色精等身分HeXie而成);
  5. After drying, cover with a layer of fluorocarbon antique colorant (antique copper colorant is made of HeXie, an oily colorant with different colors of fluorocarbon varnish);
  6、层仿古着色剂干后再包围一层氟碳清漆,牢固效果更出色;
  6. After the first layer of antique colorant is dry, it is surrounded by a layer of fluorocarbon varnish, which has better firm effect;
                                                                  不锈钢酒店装饰
  7、注意事项:操作过程中必须做好防护措施(塑料手套、口罩)。
  7. Precautions: protective measures (plastic gloves, masks) must be taken during operation.
  不锈钢仿古做旧常用方法
  Common methods of stainless steel antique
  1、电镀,然后药水染色做成古铜色。此工艺复杂、成本贵,时间久了会氧化长铜锈绿穿孔,不环保;
  1. Electroplate, then dye it with liquid medicine to make it bronze. This process is complex and expensive. It will oxidize long rust green perforation after a long time, which is not environmental friendly;
  2、在不锈钢表面喷涂粉漆再覆上一层格丽斯油漆,然后手工拉丝。该工艺较为粗糙,不上档次;
  2. Spray the stainless steel surface with powder paint and then apply a layer of Grice paint, and then draw it by hand. The technology is rough and inferior;
  3、药水氧化仿古铜工艺,该工艺浸泡上色后处理,膜层牢固色泽逼真,价格合理。
  3. The process of ancient copper oxidation by liquid medicine, which is treated after soaking and coloring, makes the film firm and vivid in color and reasonable in price.
  以上是关于不锈钢仿古做旧流程工艺的详细介绍,想要了解更多内容欢迎点击http://www.719gcxzh.cn网站。
  The above is a detailed introduction of stainless steel antique process. For more information, please click http://www.719gcxzh.cn Website.
分享到:QQ空间新浪微博腾讯微博人人网微信